Standard Packages

• 2D Floor Plan and 3D Elevation
• Structural Design as per IS Code, Soil Test Report
• Isometric View, Furniture Layout, Schedule of Openings, Working drawings for all works
• MEP Designs (Electrical & Plumbing Drawings)

Height of each floor shall be 10’0″ from Finished Floor level to Finished Floor level
Steel (500/550 TMT bars) – Sunvik or Meenakshi or Kamdhenu or Equivalent (Rs.70,000/Ton)
Cement (Garde 53 Pillar, Slab. & Grade 43 for Plastering) Birla Shakti or ACC or Dalmia or Equivalent (Rs.380/Bag)
RCC Framed Structure in M-20/M-25 grade Concrete in 20mm & 40mm Aggregates.
The Foundation has been assumed as Isolated footings in regular Soil of Bearing Capacity 180kN/m^2 and above and up to a depth of 5 feet. For soil conditions requiring specialized foundation design or/and additional depth of excavation over and above 5 feet, additional charges will be applicable.
Internal Plastering (1:5 cement mortar), external plastering (1:5 cement mortar), and ceiling plastering (1:4 cement mortar) shall be done. The thickness of the internal plaster shall be 15mm and external plaster shall be 12mm + 8mm (applied in 2 coats)
Chicken mesh shall be used near beam, column and masonry wall junction and at the Chasing for Electrical Conduits
The Plinth level will be Provided at a height of 1 foot and 6 inches above the existing Ground Level.
Blockwork Masonry in Standard Solid Concrete Blocks with Plaster as per the design 4″ for internal Partitions and 6″ for External Walls.
M-Sand shall be used for Masonry and P-Sand shall be used for Plastering
Lintels shall be provided only over openings with bearing of 6″ into the edge of the openings
UG Sump – built with 6″ concrete blocks & waterproof plastered of capacity calculated based on per capita consumption.

Water proofing shall be done in the terrace slab, all washrooms and balconies using Fosroc / Dr Fixit Brushbond or equivalent brands.